[PR]上記の広告は3ヶ月以上新規記事投稿のないブログに表示されています。新しい記事を書く事で広告が消えます。
More 4G LTE Routers and 4G LTE modems are available in the market; many users would expect faster speed on 4G networks than that from 3G networks. However, the 4G / LTE signal coverage is very weak. Before the network providers can change the situation, users can connect an external 4G antenna to the wireless device to improve the data transmission. And it's better to use a high gain outdoor antenna rather than indoor 4G antenna.
To select a 4G external antenna, you need to check how many antenna connectors there is on your device and the connector type. For example, if you are using Huawei E5186 4G LTE Router , open the cover on the back, you will find the connector for external 4G antenna . The connector type is SMA-female. In the 4G data transmission, two connectors are for the MIMO technology application. So you'd better choose an LTE Antenna with two connectors. To connect to the SMA-female, the cable end of the antenna is SMA-male.
One more thing to consider is the distance between the router and the location where to install the antenna. The distance determines the length of the antenna extend cable. For example, if your Huawei E5186 LTE antenna is just outside the window than 10 meters. So you can select the cable of 10 meters. Somebody may suppose the cable, the better to use. However, the gain would lose more. So the antenna cable is better in short. If your device is far from the installation point, you'd better choose to use high-quality material in the cable so as to reduce the loss. The good news is que la extend cable for the outdoor LTE antennacould be customized on www.4gltemall.com. So you do not worry about the cable. Below are recommended Outdoor LTE External antenna to use with 4G LTE Gadgets:
Technical Specifications:
* Frequency Range: 698-806MHZ / 824-894mhz / 925-960mhz / 1710-1885MHZ / 1920-1980MHZ / 2110-2170MHZ / 2500-2690MHZ
* Gain: 24dbi
* Polarization Type: Vertical
* Radiation: Omni directional
* VSWR: ≤1.5
* Impedance: 50Ω
* Max Power: 50w
* Connector Type: customization (The extend cable can be with SMA, TS-9, CRC or other connectors.)
* Cable Type: RG58 (best) 100% cooper
* Cable Length: for customization
* Dimensions: 9.85x 18.5x 1.2inches
* Weight: 2.58 Pound
See compatible 4G LTE devices and buy this high gain antenna here:
https://www.4gltemall.com/4g-high-gain-lte-panel-flat-outdoor-antenna.html
Technical Specifications:
* Frequency Range: 698-806MHZ/824-894mhz/ 925-960mhz/1710-1885MHZ/1920-1980MHZ/2110-2170MHZ/2500-2690MHZ
* Gain: 18dbi
* Polarization Type:Vertical
* Radiation: Omni
* VSWR: ≤1.5
* Impedance: 50Ω
* Max Power: 50w
* Connector Type: options (SMA, TS-9, CRC-9 connectors)
* Cable Type: RG58(best)100% cooper
* Cable Length: customization
* Color: White(default), Black
* Dimensions: 8.27x 8.27x 1 inches
* Weight: 1.32 Pound
See compatible 4G LTE devices and buy this high gain antenna here: https://www.4gltemall.com/high-gain-flat-panel-4g-outdoor-antenna.html
Technical Specifications:
* Frequency Range: 698-806MHZ/824-894mhz/ 925-960mhz/1710-1885MHZ/1920-1980MHZ/2110-2170MHZ/2500-2690MHZ
* VSWR: ≤ 2.5
* Gain: 28dBi
* Polarization Type: Vertical
* Radiation: Directional
* Input Power: 50W
* Input Impedance: 50 Ohms
* Connector Type: SMA/TS-9/CRC-9
* Connector Quantity: one
* Cable Type: RG58 (best) 100% cooper
* Cable Length: 1.5m (more options for extend cable available.)
* Dimensions: 22.8x 2.7 x 0.8inches * Weight: 0.42 Pound
See compatible 4G LTE devices and buy this high gain antenna here: https://www.4gltemall.com/28dbi-high-gain-4g-outdoor-yagi-directional-antenna.html
Technical specifications:
* Antenna type: LPDA
* Frequency Range (MHz): 698-960/1710-2700 MHz
* Bandwidth: 262/990 MHz
* Gain: 15 dBi
* beam width: H：90°/70° V：60°/55°
* VSWR: ≤1.5
* Input Impedance: 50Ω
* Polarization: Vertical or Horizontal
* Front to Back Ratio: 18dB
* Max, power: 50W
* Connector Qty: 1
* Connector Type on Antenna: SMA-Male / TS-9 / CRC-9
* Cable: 10 meters / 15 meters / 20 meters (RG58)
* Radome material: protected ABS
* Lightning Protection: DC ground
* Working Temperature: -40 ~ 60 ℃
* Rated Wind Velocity: 60m / s
* Color: white
* Mounting way: hold in the pole
* Pole diameter: ¢ 35-50
* Size (mm): 410 * 215 * 65mm
* Antenna weight: 750g
* Package content: - 1 x LPDA Antenna - Extend cable - Accessories to mount the antenna
See compatible 4G LTE devices and buy this high gain antenna here: https://www.4gltemall.com/wide-band-log-periodic-yagi-lte-outdoor-antenna.html
As Netgear's first LTE category 9 mobile hotspot, Aircard 800s has improved configuration for LTE Advanced networks. Netgear Aircard 800s Optus 4G WiFi Modem AC800S . With support of LTE Cat.9 and 3 band carrier aggregation technology, Netgear AC800S could achieve speed up to 450mbps and speed up to 50mbps, which is faster than that of LTE Cat.4 mobile hotspots. The AC800S Netgear could provide LTE Advanced connectivity, swift application response times, reliable connectivity and a better overall experience for buffering data-heavy programs such as multimedia and video files.
User-friendly Touch Screen Netgear AC800S modem is not only fast for wireless internet connection but also extremely user-friendly. Like its predecessor Aircard 810s, Aircard 800s modem has a simplified touch screen, where users can see the important information about the internet, such as the signal strength, network provider name, battery status, data consumed, WiFi SSID and password, WiFi connected user quantity, SMS, and settings etc.. The most important is that user can do simple settings through the touch screen like operating a smartphone. The Netgear Aircard 800s is well positioned to offer you a superior mobile broadband experience like never before.
Below are the features and characteristics for Netgear AC800S for reference:
| Features and characteristics of Netgear Aircard 800S | |
| Manufacturer and type | Netgear AC800S |
| Chipset | Qualcomm Cortex-A7 |
| LTE category | LTE Cat.9 |
| Download rate up to | 450 Mbit/s |
| Upload rate up to | 50 Mbit/s |
| Supported LTE bands | 700 (B28), 1800 (B3), 2100 (B1), 2300 (B40), 2600 (B7) |
| Downwards compatible with | GSM, EDGE, HSDPA, DC-HSPA+ |
| Support 3G Bands | 900/2100 MHz |
| Support for LTE-Advanced | Yes |
| MIMO Support | Yes, 2×2 MIMO |
| SIM Type | Micro-SIM (3FF) |
| Connection for external antenna | Yes, two TS-9 connectors(Buy Netgear AC800S Antenna) |
| Network | LAN & WLAN | |
| LAN Ports | No |
| WLAN Standards | 802.11 b/g/n/ac (dual-band 2.4 and 5 GHz) |
| 5 GHz WLAN Support | Yes |
| Multiple SSID/Guest WiFi Support | Yes |
| Encryption | WPS/WPA/WPA2 |
| WLAN Hotspot Function | Support maximum up to 15 users |
| Telephone | |
| With integrated telephone system | no |
| Connector for ISDN telephones | no |
| Connection for analog telephones | no |
| DECT | no |
| integrator answering machine | no |
| Others | |
| IPv6 Dual Stack | No |
| Battery Capacity | 2930 mAh, Up to 11 hours of continuous usage |
| Battery Removable | Yes |
| Battery Standby time | 260 hours (typical) |
| Dimension | 110 (L) x 68 (W) x 16.1 (H) mm |
| Weight | 82 g (without battery), 132 g (with battery) |
| USB | USB 3.0 compliant charging cable |
| Memory Card Expansion | No |
| Release | Apr, 2017 |
| Price | 199.00USD for unlocked version |
| available at | »Optus and www.4gltemall.com |
| File Download | |
| Quick start guide | » Download Netgear Aircard 800s spec(PDF) |
| Detailed manual | » Download Netgear AC800s manual(PDF) |
LTE Category 9 Modem
The Netgear 800S is designed to support LTE advanced network with LTE Category 9 and CA technology, which could support peak download speed to 450mbps. As a WiFi hotspot, Aircard 800 could support maximum 11 WiFi-enabled devices simultaneously. However, for many users, the carrier deployed networks have not reached LTE advanced. So Netgear Aircard 800s is a future-proof mobile router.
WLAN Standard 802.11ac with dual-band Netgear AC800S would increase network performance and reduce interference with 802.11ac and Dual-Band 2.4 GHz/5 GHz WiFi. What’s more, it could support multiple SSID and guest WiFi function, which is usually available for high-level LTE mobile hotspots. In addition, the WPN (WiFi Protected Setup) feature is available.
Other features The Aircard 800 modem has a removable battery of 2930mAh, which could keep working for 11 hours and standby time could last for 260 hours. The battery can make Netgear 800s work like a power bank to charge other electric devices, which Netgear call it “Jump Boost” function. With the device, the Jump Boost cable is provided. Like other Netgear 4G mobile routers, Aircard 800s also has two connectors(TS-9 type) for a 4G external antenna.
Summary Netgear Aircard 800s is a high-level mobile LTE advanced network to get fast speed connection on WLAN 802.11ac dual band. The large battery could keep itself working for a long time and charging other terminals. The dual connectors are also vulnerable to weak signal areas. The Netgear AC800s is LTE-A mobile hotspots. If you want to buy an LTE-A mobile hotspot, the Netgear AC800S is a good one to consider.
To buy Netgear Aircard 800s (unlocked), click here: https://www.4gltemall.com/netgear-aircard-800s-lte-cat-9-mobile-hotspot.html
With the development of LTE network and technology, many users are not satisfied with the wireless speed. They want faster speed. So the support of LTE advanced network is necessary to get higher LTE speed. The good news is that many network providers already upgraded their network to LTE advanced or advanced Pro with carrier aggregation and MIMO technologies. To fulfill higher speed on LTE-A networks, many network manufacturers were already presenting their mobile 4G routers to meet the requirements. Below are the recommended LTE Cat. 6 portable 4G router from famous equipment supplier:
Netgear Aircard 790s is the world’s first LTE cat.6 mobile router and it’s the first mobile 4G router with touchscreen. Below are the highlight features of Aircard 790s:
* Manufacturer: Netgear Wireless
* Support LTE frequency band 1/3/7/8/28 (700/900/1800/2100/2600 MHz)
* Chipset: Qualcomm - MDM9230 (Modem) - WTR3925 (RF) - QCA6174 (Wi-Fi)
* Connect up to 15 WiFi enabled devices on the go
* Supports Cat 6 LTE with carrier aggregation (up to 40 MHz)
* Capable of download speeds of up to 300mbps
* Future proof for the premium 700 MHz spectrum
* Removable lithium-ion (2930 mAh), Last up to 11 hours of active use
* Wi-Fi 802.11 ac/b/g/n, 2x2 MIMO, Dual-Band 2.4GH/5GHz
* 2.4” QVGA capacitive LCD touchscreen * SIM Type: 3FF Format (microSIM)
* Two external antenna connectors (TS-9 type)
Check more details about Netgear Aircard 790s: https://www.4gltemall.com/netgear-aircard-790s-4g-mobile-hotspot.html
* Manufacturer: Huawei
* Three variant models: E5786s-32a, E5786s-62a, E5786s-63a
* Support LTE frequency band 1/3/5/7/8/20/38 (E5786s-32a), band 1/3/8/28(E5786s-62a), band 1/3/7/8/28/40 (E5786s-63a)
* Chipset: HiSilicon LTE Cat6 chipset
* Connect up to 10 WiFi enabled devices simultaneously
* Supports Cat 6 LTE with carrier aggregation
* LTE download speeds of up to 300mbps, upload speed to 50mbps
* Non-removable lithium-ion (3000 mAh), maximum up to 10hours working time
* Wi-Fi 802.11 ac/b/g/n, 2x2 MIMO, Dual-Band 2.4GH/5GHz
* 2.4” QVGA capacitive LCD touchscreen
* SIM Type: 3FF Format (microSIM)
* Two external antenna connectors (TS-9 type)
Check more details about Huawei E5786: https://www.4gltemall.com/huawei-e5786-4g-lte-cat6-mobile-wifi.html
* Manufacturer: ZTE
* Support LTE frequency band B1/2/3/4/7/8/20/28/12&17
* Chipset: Qualcomm - MDM9230 (Modem)
* Connect up to 14 WiFi enabled devices simultaneously
* Supports Cat 6 LTE with carrier aggregation
* Capable of download speeds of up to 300mbps
* Future proof for the premium 700 MHz spectrum
* Non-removable lithium-ion (2300 mAh), Last up to 8 hours of active use
* Wi-Fi 802.11 ac/b/g/n, 2x2 MIMO, Dual-Band 2.4GH/5GHz
* 1.44” TFT screen * SIM Type: 3FF Format (microSIM)
* Two external antenna connectors (TS-9 type)
Check more details about ZTE MF970 UFi: https://www.4gltemall.com/zte-ufi-mf970-lte-cat6-mobile-wifi-hotspot.html
* Manufacturer: Alcatel One Touch
* Support LTE frequency band B1/3/7/8/20
* Chipset: Qualcomm - MDM9230 (Modem)
* Connect up to 32 WiFi enabled devices simultaneously
* Supports Cat 6 LTE with carrier aggregation
* LTE downlink speeds of up to 300mbps, uplink to 50mbps
* Removable lithium-ion (3600 mAh or 1800mAh), last up to 8 hours of active use or more
* Wi-Fi 802.11 ac/b/g/n, 2x2 MIMO, Dual-Band 2.4GH/5GHz
* 1.44” TFT screen
* SIM Type: 3FF Format (microSIM)
* No external antenna connector
Check more details about Alcatel Link Y900: https://www.4gltemall.com/alcatel-link-y900-4g-led-mobile-hotspot.html
* Manufacturer: Huawei
* Support LTE frequency band B1/B2/B3/B4/B5/B7/B8/B20/B19/B38/B40/B41
* Chipset: HiSilicon LTE Cat6 chipset
* Connect up to 32 WiFi enabled devices simultaneously
* Supports Cat 6 LTE with carrier aggregation
* With one Ethernet Port for LAN (RJ45)
* LTE download speeds of up to 300mbps, upload speed to 50mbps
* Non-removable lithium-ion Large battery (6400mAh), maximum up to 20hours working time
* Wi-Fi 802.11 ac/b/g/n, 2x2 MIMO, Dual-Band 2.4GH/5GHz
* 0.96 inch OLED display
* SIM Type: 3FF Format (microSIM)
* No external antenna connector
Check more details about Huawei E5885(Portable 4G router with Ethernet port and Sim card slot & large battery): https://www.4gltemall.com/huawei-mobile-wifi-pro-2.html
From the specs of the mobile 4G routers, we can see each one has its own specialty. Huawei E5885 seems to be the most powerful with Ethernet port and large battery for mobile use. It’s the latest one available since 2017 but price is still at high range. Other models may not be the latest, but the price is budget. If you are looking for a portable 4G router with the support of LTE Category 6 and CA, the above mobile 4g routers are recommended.
As time goes on, LTE networks to LTE and LMI. Many customers want to surf at the faster speed than ever. So an LTE advanced router may be needed for home or office. Huawei B618 and B715 are two latest popular routers for the LTE-A networks. Someone may ask: what's the difference between Huawei B715 and B618? To buy one from them, which one is better? To answer this question, let's have a look at the two LTE WiFi routers.
Appearance
Huawei B715 and B618 router both could work well in Europe. Some network providers already introduced them to their contract plan. The Huawei B618 was available for EE, Telekom on the model number B618s-22d while B715 was available for LMV on the model number B715s-23c. The Huawei B715s-23c looks like the common Huawei 4G WiFi router such as Huawei E5186 or Huawei B525, but Huawei B618 looks like a cube. You may think it’s a smart home device rather than an LTE-A wireless router.
On the front of Huawei B715s-23c, there are few indicators for power, data transmission, WiFi, connected device, and signal. On the back, there are 4 RJ45 ports for LAN, one of which is for WAN/LAN. And one RJ11 port is available for connecting telephone. Huawei B618s-22d LTE router has only one port for LAN/WAN and another one for LAN only. They both have a USB 2.0 port for sharing file. Like other Huawei LTE routers, the Huawei B715s-23c has two SMA connectors for external antenna while the Huawei B618s-22d WiFi router has two TS-9 connectors for 4G external antennas. They both have the same feature that the SIM card slot is at the bottom of the body.
Technical Specifications To know more about the technical specs of the two LTE-A router, the table below will give clear information about the chipset, category, data rates, supported frequency bands, interfaces, and prices etc..
| Model | Huawei B715s-23c | Huawei B618s-22d |
| Product type | LTE WiFi Router with SIM card slot and Ethernet port | LTE WiFi Router with SIM card slot and Ethernet port |
| Category | LTE Cat.9 | LTE Cat.9/ Cat.11 |
| Chipset | ? | HiSilicon Balong 750 |
| Data rates | DL 450Mbps/UL 50Mbps | DL 600Mbps/UL 100Mbps |
| Supported 4G LTE frequency bands | LTE B1, B3, B7, B8, B20, B28, B32, B38 | LTE B1, B3, B7, B8, B20, B38 |
| WiFi | 802.11a/b/g/n/ac, dual-band 2.4GHz & 5GHz | 802.11a/b/g/n/ac, dual-band 2.4GHz & 5GHz |
| Max support users | 64 users | 64 users |
| MIMO | 4 X 4 MIMO | 4 X 4 MIMO |
| Connector for external antenna | Two, SMA-female jacks | Two, TS-9 jacks |
| App management | Huawei Hilink APP | Huawei Hilink APP |
| SIM type | Micro SIM | Micro SIM |
| Battery | NO | NO |
| Dimensions | 240mm × 448mm × 47mm | 95mm × 95mm × 208mm |
| Interfaces | * 3 x LAN port(45) * 1 x LAN/WAN port (45) * 1 x telephone port(RJ11) * 1 x USB 2.0 port | * 1 x LAN port(45) * 1 x LAN/WAN port (45) * 1 x telephone port(RJ11) * 1 x USB 2.0 port |
| Other features | VPN, VoLTE, IPv4 /IPv6 dual stack, DMZ, Port forwarding | DHCP Server, DNS RELAY and NAT, VoLTE, IPv4 /IPv6 dual stack |
| Price | 399.00USD | 449.00USD |
Conclusion
From the appearance, we can see both the Huawei B618s-22d and B715s-23c are cool, but I personally love Huawei B618s-22d better. Goal if you want the wireless router to Have More Ethernet ports to connect your desktop, the Huawei-23c B715s May be better. From the specs, we can see Huawei B618s-22d support higher level LTE networks with faster LTE downlink & uplink speeds. But if you need the LTE frequency band especially for band 32 or band 28, Huawei B715s-23c should be taken into consideration. And the Huawei B618s-22d with advanced LTE technologies would be more expensive, if you do not care about the price, Huawei B618s-22d would be the right one for your home or office.
Not all mobile devices are equipped with a SIM card. However, you have to know the latest Netgear Nighthawk M1 with high speed via LTE, the most important is that it's an advanced LTE router with SIM card slot and Ethernet port . The Nighthawk M1 could achieve speed up to 1Gigabit, which is almost in the range of 5G speed.
Nighthawk M1 from Netgear is known for fleet router for mobile use, can it also be used at home or office. The 4G SIM router has a battery for mobile operation and can be loaded in every suitcase and almost every handbag. It simply gets his network from the air via the LTE wireless networks and transfers data for up to 20 devices. Thus, it should be the ideal companion for every trip.
Netgear introduced the Nighthawk M1 last year at the Consumer Electronics Show (CES) in Las Vegas. The Australian carrier Telstra first introduced the Nighthawk router to its product range and then US carrier ATT followed. A year later, the device is finally available for users in Europe. Fortunately, the Netgear M1 comes out in Europe without a provider branding, so it’s unlocked can be operated in any network. In the US, the Nighthawk mobile router is limited to AT&T's network while the Nighthawk router is limited to Telstra in Australia. The built-in modem supports the LTE Cat.16 and achieves maximum speeds of 1 gigabit per second (Gbps) in the download, at least in theory because only a few areas in Europe give such transmission rates. In addition, the transfer to mobile devices is possible via WLAN-ac or the built-LAN connection. The Netgear Nighthawk M1 always ensures fast Internet everywhere.
Anyone surfing through LTE should always keep an eye on current consumption so as not to exceed the high-speed volume. The Nighthawk M1 succeeds on a built-2.4-inch display. At the side of it are the status indicator for the current battery level and the strength of the network. If the latter is too low, the Netgear M1 will accept a maximum of two TS-9 antennas for reception. The user can control or setup the mobile 4G router through web page or Netgear Mobile APP. The Netgear Mobile app can be used to make settings and even set up a parental control. The built-in battery is generously sized with 5040 mAh and can keep continuous working for a day and a night according to the manufacturer.
Netgear Nighthawk M1: Price and Availability
Since Telstra and ATT had already presented the product to the public for a long time, there are many unlocked Nighthawk M1 available in the market. The unlocked Nighthawk M1 is available on-line www.4gltemall.com with a price of around 459.00USD with free 4G MIMO Antenna with two TS-9 connectors. For the operation, it then still needs a micro-SIM card and a corresponding tariff. If you would take the Nighthawk M1 for travel, you'd better get an unlocked Nighthawk M1 router and get a valid SIM card from the network provider in the M1 router. But you'll never get an unlocked M1 Nighthawk from the carriers in the country destination.
